New home aquarium setup
Aquarium maintenanceSo, you are an absolute beginner in this hobby and you want to setup your first aquarium at home. Here are the simple clear steps that will guide you in the aquarium installation process.
STEP 1: BASIC INVENTORY BEFORE GETTING STARTED
MANDATORY: Make sure you have all these items before starting to setup your aquarium:
- aquarium (doooh!) : most if not all the beginners tend to get a small aquarium thinking that it is enough but let me tell you that the bigger it is, the better. There are a few reasons for getting a larger aquarium, one of them being the fact that you will always want to get more fish and plants, after you start to enjoy the hobby; a small aquarium isn’t suitable for fish and overcrowding fish is the first trigger for various diseases and even death. Another reason to get a bigger aquarium is that the large aquariums are more stable when we talk about water chemistry and temperature (they vary slower than in small aquariums – the slower they vary, the better for the fish and their health). Generally, don’t start with an aquarium smaller than 100 liters (remember that the gravel, filter, ornaments and the fact that the tank must not be filled 100% with water already reduce the volume of water available for your fish).
- aquarium filter: the filter must be chosen for the volume of your aquarium (check their ranges per volumes of water – don’t get stronger or weaker filters, just get the one that fits the volume of your aquarium). You can choose from external and internal filters. The advantage of external filters is that they don’t take up space inside your aquarium (and also helps with the beauty of your aquarium if you’ll want some aquascaping / aquarium design).
- aquarium gravel: there are many options here
- aquarium heater: usually a heater is necessary to keep the temperature of the water in the right range for the species of tropical fish you have. Don’t even think about getting a heater without a thermostat. On the other hand, I don’t use a heater right now since the temperature of the room always keep the one inside the aquarium at the right ranges for the fish I have. This saves some bills and also declutters the aquarium.
- light units: won’t get into detail here, just get the light equipment suitable for your aquairum. You might also want to get a plug timer to turn on and off the light every day.
OPTIONAL:
- ornaments: you might want to get a few ornaments to complement the plants and general look of your aquarium. The best are natural ones like rocks and different wooden roots (please make sure they are suitable for the aquarium – get them from a fish store not from your backyard!)
PLEASE don’t get colored gravel (pink gravel?! OMG, no!), scuba divers, cranes, etc – they just ruin the little nature corner you want in your home by setting up an aquarium. - aquarium plants: since you shouldn’t add live plants or fish right from the beginning, you should get these later, after your aquarium is ready to host life.
STEP 2: PLACING THE AQUARIUM IN YOUR HOME
You have to choose the location for your aquarium, and believe it or not, this is a difficult step. There are a few things you must know before deciding the final location of the aquarium in one of your rooms:
- The aquarium must not be visited directly by the sun light (if it does, there are big chances that your water will turn so green that you won’t be able to see the fish :)). This is a green algae invasion and it is very common for beginners.
- In case your aquarium didn’t come with a stand of its own included, you must be very careful in choosing the stand it will be placed on. This must be able to sustain the full weight of the aquarium (think about the sum weight of the empty aquarium, the gravel, the internal filter, volume of water). Don’t forget to make sure that the floor is also capable of sustaining all these.
STEP 3: INSTALLING THE GRAVEL AND ACCESSORIES
Wash the gravel thoroughly first. Use a big bucket filled with water and only fill 1/4 of it with gravel to clean it very well. Stir the gravel a lot and change the water several times until the water comes clean after stirring the gravel. Then you can add it to the tank. Place the filter in position reading the book of the aquarium and/or filter carefully. Add the heater if you are going to use it.
STEP 4: FILLING THE AQUARIUM WITH WATER
Before filling the tank with water, wash it a bit only using clean water, no soap or detergents! These can hurt your fish even if you think you washed them away properly. When you add the water, please don’t fill the aquarium 100%, keep a height of 3-4 fingers from the top empty. Some aquariums bought as a package also have a red line indicator and the water must be kept below that level. To avoid destroying the layout of your gravel and ornaments, place a clean piece of paper and then pour the water on it. You can remove the chlorine from the water using “AquaSafe” or any other brand, but why not save some money since you don’t bring the fish so quickly anyway?
STEP 5: CYCLING OF THE AQUARIUM
This is the process in which the live bacteria “filter” builds in the tank. It is very important to wait until it is established. If you don’t, your fish might die. Usually it takes several weeks to complete. However, you can complete this step with a few fish in your aquarium. LINK
STEP 6: ADDING THE FISH
This is the moment we’ve all been waiting for! :) You’re excited, but don’t hurry to add too many fish. It is recommended to add only a few fish every few days so that your biological filter adjust to the new population and waste produced. You can set a rule of adding a few fish (4-5) every weekend, for example. You are looking forward to seeing the fish swimming in your aquarium, but…you need a bit more patience here!
Let the bag with fish float in the tank for about 10 minutes (especially if it is winter) so that the temperature of the water in the bag equals the one in the tank. Then, to avoid the PH shock, open the bag and attach it to the border of the tank with a hook and add some water from the aquarium to the bag (about 20% of the bag). Do this again every 10-15 minutes for 5 times. Every time reduce the water volume of the bag by 20% to allow new water from the tank. Then, the fish are ready for their new home! Slowly let them escape from the bag in the aquarium.

They will need some hours or even days to get used to their new environment. Don’t feed them in the first hours, since they will avoid food anyway, being a bit shy at first. However, if you already have other fish, this process of getting used to the tank is much faster, the new fish being encouraged by the existing inhabitants.
How many fish to add? A general guideline is the “inch per gallon” rule.
DONE!
Now you have to write down a schedule of maintenance for your tank, with regular water changes once every 2 weeks or more often, depending on the number of fish you have. Regular water changes keep the fish healthy by removing bad chemicals and waste and they also stimulate plant growth.
After you reward yourself watching the new fish, get ready for the next article on aquarium maintenance.